CONNEX 350

Instrument: CONNEX 350

Plastics 3D printer used for printing with multiple plastic simultaneouslty to allow designers and engineers to rapidly build prototypes to simulate their intended end-product closer than any other technology.

Actions

You need to login or register to bookmark/favorite this content.

Post author: Milan Brandt. Last update: 06/03/2014 at 2:17 pm by Milan Brandt.

Overview

Phone:

Details

Overview

Manufacturer: Object Geometries Inc.

From an unrivaled range of over 60 materials including up to 51 Digital Materials™, the Objet Connex350 allows users to simulate diverse mechanical and physical properties, from rubber to rigid; opaque to transparent; and standard to ABSgrade engineering plastics.

Benefits of the CONNEX 350

Multi-material models – eliminating the need to design, print and glue separate model elements together.

Printing Modes
» Digital Material (DM) 30-micron
» High Quality (HQ) 16-micron
» High Speed (HS) 30-micron

Technical features and specifications

Unique Features
» Multi-material models – eliminating the need to design, print and glue separate model elements together.
» Different parts. Different materials. Same tray – saves time and serves multiple requirements simultaneously.
» Outstanding 16-micron, high-resolution print layer accuracy.
» 600 DPI X & Y resolution.
» Thin walls down to 0.6mm (0.024”).
» High throughput – Up to 20mm per hour per strip.
» Reliability and robustness – at least 72 hours of non-stop build capacity.
» High speed – simultaneously print multiple items of different materials; models cure while printing models can be handled immediately after print.
» Easy-to-remove support material enabling complex geometries.
» Office convenience – Quiet system, using fullysealed REACH compliant cartridges that are easy to load and unload.

Technical Specification
» Layer Thickness (Z-axis) Horizontal build layers down to 16-micron
» Tray Size (X×Y×Z) 350×350×200 mm » Net Build Size (X×Y×Z) 342×342×200 mm
» Build Resolution X-axis 600 dpi Y-axis: 600 dpi Z-axis 1600 dpi
» Typical Accuracy 20-85um for features below 50mm Up to 200um for full model size (for rigid materials only, depending on geometry, build parameters and model orientation)

Tags

Capacity: We encourage greater utilisation
Operation: Facility staff operate this instrument
Access: Access pricing may vary